B22 (Bayonet) 3x1w 120°
Cool White Floodlight
Containing Cree’s XLamp® XRE LED

Bayonet fitting (BC22)

Dimensions:
Diameter on top: 48 mm
Overall Length: 76 mm
Protusion: 46 mm
Weight: 60 grams

Easy installation using existing sockets

Achieving 120 degree viewing angles using Cree 3x1w diodes you can expect above 20w halogen performance from this bulb.
The bulbs will reach 50,000 hours service life due to the quality of their manufacture. Thermal overload protected and constant current regulated.
If the bulb gets too hot it shuts off and returns to normal operation when it's cooled down.
Two things will kill an LED fast:
Excessive heat and unregulated current.
The power must be consistent without highs and lows.
Using constant current drivers we regulate the amount of power coming into the bulb despite variations in source current supply.
The thermal cut-outs provide additional protection in cases where the bulb is operated in excessively warm conditions.
They're expensive but good value for money over the service lifetime.

Nett Weight 55 g
LED type: 3 x Cree XRE 7090
Luminous intensity: 270 lm
Colour wavelength 6000 K. average
LED power continuous: 5 W
Constant Current: 3 x 140 mA
Input voltage range: 90 to 265 V AC
Working temperature: -40° to plus 40°C
Average life 20,000 hours maximum 50,000 hours

BC22 LED DOWN LIGHT
Containing Single 3w Cree XLamp® XRE LED

Single 3w Cree XRE XLamp
85~260vAC
3~4w Power consumption

The B22 LED downlight is very much the same as the downlight seen above except that instead of using 3x1w diodes it uses a single 3w diode. It isn't as bright as the 3x1w unit but it is less expensive. We would imagine it is about 80% of the luminous output of the 3x1w unit.

Check and/or change the contents of your Shopping Cart