LED 3-chip flux anchor light
Our anchor lights are made from 3Chip flux LED.
Look for a amber dot in the centre of the LED - that's 3 Chip.
If they're clear - they're a single layer and shouldn't be used in marine applications.
When shopping for flat panel LED - ask for clarification of LED type !

These bulbs protrude about 40 mm out of the socket ( usually 1156 BA15S protrude about 24 mm)

Superbright 3 chip super FLUX LED with BA15 base
Available in: BA15S ($25), BA15D ($30), BAY15D ($30)

Warranty 12 months.

LED marine/boating lights
Frequently Asked Questions about our Anchor Light!!

Operating Voltage:

BAY15D - 8~29vDC constant current driver
BA15D - 8~25vDC constant current driver
BA15S - Regulated 12vDC only

Must be used behind a waterproof fitting if used in marine applications.

It utilizes 3 Chip Flux LEDs - we arrange 5 lots of 3 at different angles and have 3 on top.

It has no UV output - and has a less than 100ns turn-on time.
Can be used in Aeroplanes as Strobe/Navigation lights

Please select your base type below :
read this before you purchase

BA 15S (1156 )
Model No: 2555
1 oval base contact -Parallel side pins - Regulated 12vDC only
AUD$ 25.00
including Gst

BAY 15D (1157)
This bulb suitable for most Aqua Signal and Hella Anchor lamps
Hella may not fit always fit for length-
(In these cases use the shorter SMT version )
40 mm protruding from socket

BAY 15D (1157)
Model No: 2570
2 oval connectors - Staggered pins- 8~29vDC
AUD$ 30.00
including Gst

BA 15D (1157)
"This bulb is also known as a 1142 LED bulb.
Twin contact - same height side locating pins and no metal base connection"

BA 15D (1157)
Model No: 2540
2 oval connectors - parallel pins - 8~29vDC
AUD$ 30.00
including Gst

360 degree
Visible to 5 miles clear weather

Suitable for anchor lights on vessels up to 50 m

Power Consumption: 3w
Warranty: 12months/10000hrs
Colour range: 5500k (almost pure white)
Type: InGaN White
Expected lifespan: 80000hrs
Continuous Forward Current 100 mA
Reverse Voltage 5 V
Operating Temperature Range -30C to +85C
Storage Temperature Range -40C to +100C

Overall length:60.1 mm
Protrusion out of socket: 40 mm
Diameter on top: 28.0 mm

Shipping & Order information on the bottom of page

:::::Marine bulb fittings:::::

BA15S 1156 Sockets
#2040

12 volt connectors for BA15S 1156 series automotive and marine bulbs.
(parallel pins)

BAY15D 1157 Sockets #2055

12 volt connectors for BAY15D 1157 series automotive and marine bulbs
(staggered pins)

BA15D 1157 Sockets
#2025

12 volt connectors for BA15D 1157 series automotive and marine bulbs
(parallel pins)

Shipping & Order information on the bottom of page

back to top of page

You can change the quantity of your selected products in the shopping cart

Check and/or change the contents of your Shopping Cart

You can also order by Email (sales only) Fax, Phone, and Mail
For information on our products utilise the Info email address

Use the XE.com® currency converter to check our prices in your country's currency

back to top of page

LED home lighting 12 volt II LED home lighting 240 volt

Automotive LED bulbs II Marine LED replacement bulbs II LED Flashlights & Headlamps II Special LED Bargains

Contact & Support II Resources II FAQ's II FREE AUSTRALIANA wallpapers

Shipping , Warranty, Returns and Order Cancelation

Contact us II Back to LED Shop home page

Best viewed with 1280 x 1024 screen resolution and Firefox/Opera/ Internet Explorer

Thank you for visiting our web site !

Automotive LED Replacement Bulbs

Australian and Worldwide leader in superior LED products. Renowned for product support and backup. Innovation a speciality - watch this site !

Operating Voltage:

BAY15D - 8~29vDC constant current driver BA15D - 8~25vDC constant current driver BA15S - Regulated 12vDC only