OUTDOOR LED PRODUCTS

 

back to top of page

12 LED headlamp:
This has been our most reliable unit now for over 3 years.
It has shown very good durability results in testing and the LEDs used are the brightest we currently have available at around 12000mcd each LED.
The swivel function is almost bulletproof compared to earlier models and the strap needs placing over a soccer ball when you first get it to loosen it up a little.
Earlier models had loose straps and we are using a stronger type now.

back to top of page

1w Luxeon and 3 LED headlamp.
Has the dual function 1w/3*LED combo - the 1w unit will penetrate a clear 50m beam into darkness for up to 6hrs on one set of 3xAA alkaline batteries.
When switched to the 3*LED (around 10000mcd) setting you'll achieve full light for around 30-40hours - more as we ran out of patience waiting for it to run down.

back to top of page

12 LED flashlight UV - Ultra Violet

Due early June this flashlight will feature 400~430nM LED's with a 2xAA battery set up - a good standard UV flashlight.

back to top of page

24 LED flashlight Maglite style - discontinued

back to top of page

LED Light bar SMT Cool White 8~30vDC (300mm and 600mm)

LED Light Bar 4x1w and 8x1w Warm White

April 2008 Lightbar update:.
Our new 36 SMT lightbar looks exactly like a fluoro of the same length.
Using less power and giving same angle of light - 180°

Due late April or early May 2008 will also be 300mm version previously available in the 4x1w setup it will now feature 18 high power SMT/SMD LEDs.
The range therefore will be - 4 by 1w 300 mm warmwhite, 8 by 1w 600 mm warmwhite, 18 SMT 300 mm cool white and 36 SMT 600mm cool white.
For a much more ambient feel with minimal loss of lumens the warm white is the better option.

"Can I use this lightbar outdoors?"

You'll need to do two things:

Put a shroud over it to protect it from sunlight.
The plastic is a hardened acrylic and is UV resistant.
They're fairly impact resistant and will take a fair knock but we recommend you permanently shade them from the sun.

For wet or very humid conditions, sealing of the lightbar is essential.
Our trials have shown that moisture will appear inside the bar if not sealed in dry conditions.
Pick a dry day and put some silicone just around the end joins.
The wire assembly is waterproof but those tube ends need sealing for use in watery conditions.

The 8~30vDC operating range (for the cool white) is great for those folk who regularly run their solar battery down to near flat.
This light will operate without dimming whilst the rest of your lights go down to candle brightness.
It gives you the time to go start your generator.....

Any other questions please email us...

 

back to top of page

1156 3 chip FLUX camping/anchor light

A good all round camping light - just make sure you dont run the charger while operating this bulb.

It is an older model using series resistors - if you want a few of them - chase us up for a price.